BHARAT SANCHAR NIGAM LIMITED
(A
Govt. of India Enterprise)
Recruitment
for the post of Telecom Technical Assistant (TTAs)
BHARAT SANCHAR NIGAM LIMITED, Northern Telecom Region, New Delhi invites applications typed on A4 size paper in the prescribed Performa from eligible candidates for the post of Telecom Technical Assistant (TTAs) for the year 2008 vacancies, as per details given below:-.
Vacancy: 09* Posts: SC (01), ST (01), OBC (02), Ex- Ser (01),OC (04)
*Vacancy position may change
IDA Pay Scale : Rs. 7100-200-10100 plus usual allowances as per rules.
Eligibility : Only Indian nationals would be eligible to apply.
Educational qualification : The Applicant must possess, as on the last date of receiving applications, the educational qualifications in any of the following disciplines from a recognized Institute/University:
a) Three Years Engineering Diploma in
- Telecommunications Engineering
- Electronics Engineering
- Electrical Engineering
- Radio Engineering
- Computer Engineering
- Instruments Technology
- Information Technology
b) M.Sc.(Electronics) from a recognized Institution/University.
Note: (a) Only above mentioned disciplines are accepted.
(b) Candidates possessing higher qualification in the eligible stream are
allowed to appear in the examination.
(c) Candidates possessing Three Year Diploma certificates are eligible to
appear in the Exam irrespective of percentage of marks obtained by
them.
(d) In case a candidate is possessing requisite educational qualification,
irrespective of having entered the course in the 2nd year through lateral
entry level after 10+2, he/she will be eligible to appear in the exam.
Age limit :
The applicant should be between 18 to 27 years of age.
a) However, this age is relax able for following categories of applications
(i) For Scheduled Castes & Scheduled Tribes up to 5 years.
(ii) For OBC Candidates up to 3 years.
Page 1/3
(iii) For departmental candidates-
- up to 40 years in respect of general candidates
- up to 45 years in respect of SC/ST candidates.
- up to 43 years in respect of OBC candidates.
(iv) For Residents of J&K- Relaxation shall be in accordance with DO
P&T O.M. No. 15012/7/1991-Estt.(d) dtd. 6.12.2005 pertaining to Residents of State of Jammu and Kashmir (relaxation of Upper
Age Limit for Recruitment to Central Civil Services & Posts)
Rules 1997.
Note: The crucial date for determining the age limit shall be the closing date of receipt of applications (i.e.14/11/2008 ).
Examination Fee: The examination fee (non-refundable) of Rs.500/=(Rs. Five Hundred only.) is to be sent along with application form by Demand Draft/ Indian Postal Order payable to Account Officer (Cash), BSNL, NTR, at New Delhi. No examination fee is required to be paid in respect of SC/ST candidates.
Syllabus & Medium of Examination: - The Syllabus for the examination is Annexed (published in this advertisement). Candidate will have the option to answer either in Hindi or English
Examination Center:- The examination center will be at New Delhi.
Unit of recruitment & service liability: - Normally within the NTR, New Delhi which is the unit of recruitment in which the candidate applies. Candidates if required, are also liable to serve in the Territorial Army /Signal Unit in accordance with rules made there under.
Period of Probation:- 2 Years
Selection:- By means of competitive examination to be held in accordance with syllabus and Programme as under:-
|
Part |
Subject |
Date & Day |
Time (IST) |
|
I II III |
General Ability Test Basic Engineering Specialization |
11.01.2009 (SUNDAY) |
10.00 AM to 1 PM |
Note: No bonus marks will be awarded for any higher qualifications or sports qualifications.
Page 2/3
Bond, Training & probation Period:- All candidates provisionally recruited shall execute a Bond for a period of two years from the date of their appointment in the format specified by the BSNL and shall remain on probation period of two years. The candidate selected, before their appointments as TTAs, shall have to undergo the prescribed training successfully as per the training plan laid down by the BSNL. During the period of training the direct recruited TTAs will be entitled to get stipend as decided by BSNL. The seniority of the candidates will be decided on their post training marks.
Closing date of application:- The applications completed in all respect along with the attested photocopies of the documents should be sent by Registered Post only addressed to the Assistant General Manager (R&E),O/o the Chief General Manager (MTCE.) Northern Telecom Region, Room No : 266, Kidwai Bhawan, Janpath, New Delhi Pin - 110001 so as reach in this office on or before 14/11/2008 by 1700 Hrs. positively.
Application
received after the closing date or incomplete in any respect, shall be
summarily rejected and no communication in respect of the rejected application
forms shall be entertained. BSNL shall not be responsible for any postal delay.
The envelope containing the application form should be marked with heading as APPLICATION
FOR THE POST OF TTA.
Enclosures
Three recent passport size colored photograph (front face), out of which one should be pasted on space provided in the application form, dully attested by a Gazetted officer. Two other copies should be pasted on space provide on Admit Card(duplicate copy) duly attested by a Gazetted officer. Any variation in the photograph may lead to rejection of his/her candidature.
One self address post card duly affixed with Rs. 6/- postage stamps for acknowledgement of the application. The candidate must indicate the Name of Post, Advertisement No. on the post card.
Two self addressed stamped envelopes of size 23x11 cm must be enclosed along with the application form.
Please enclose only photocopies of all the certificates and detailed mark-sheets dully attested by the candidates himself/herself as well as by a Gazetted Officer in support of age, qualification, caste etc.
NOTE: Application must be sent in the format given in the advertisement. Application sent in any other format are liable TO BE REJECTED
Asstt. General Manager (R&E)
Page 3/3
|
Affix your Recently taken Passport size Signed Photograph Attested by a Gazetted Officer |
APPLICATION FORM FOR TELECOM
TECHNICAL ASSISTANT (DIRECT
RECRUITMENT) Examination-200 8
1.Name of Recruitment Unit: ..
(Name of SSA)
2. Full name of the candidate (in Block letters)
3. Fathers/Husband name
4 . a) Postal address with PIN code to which
Communication is to be sent:
(IN BLOCK LETTER)
b) Permanent Home Address with PIN CODE: ...
(IN BLOCK LETTER)
c) Contact number : Telephone No. . Mobile No.
5 . a) Date of birth: ___ ___ ___ ___ ___ ___ ___ ___
(dd) (mm) (yyyy)
(in the format DD MM YYYY e.g. 1st May 2008 will be 01-05-2008)
(As mentioned in Matriculation or Equivalent Certificate)
(Attested copy of relevant certificate to be enclosed)
b) Age as on 14/11/2008 .
c) Whether claiming age relaxation ? Yes/No
If yes, under what category, (Write the relevant category below)
i) BSNL employees
ii) SC/ST/OBC
(Attested copies of certificate issued by Competent Authority to be enclosed)
iii) Others (please specify)
6. Place of birth and the state in which located:
7. State to which the applicant belongs :
8.(a) Whether belongs to SC/ST/OBC/General: ..
(Write the relevant category)
(A copy of OBC certificate in the prescribed format with creamy layer
issued by the competent authority should be submitted. Candidates
belonging to OBCs but coming in the Creamy Layer are not entitled to
OBC reservation.)
(b) Whether Ex-Serviceman? If yes, the total period of Military service ..
(Attested copy of discharge certificate to be attached)
9. Whether already employed in Central Government/State Government/Public Sector
Undertaking (PSU). If yes, give details.
10. Whether registered in the Employment Exchange of the SSA for which application
is made. If yes, give details.
11. Gender (Male/Female) ..
12. a) Nationality :
b) Whether by birth/ by domicile : .
13. Marital Status; (Married/Unmarried) .
14. Details of Educational/Technical qualifications
(Give details of Engineering Diploma/Degree obtained. Attested copy to be
enclosed).
(14.1) Name of Engineering Diploma/Degree with discipline
(14.2) Name of University/Institute ..
(14.3) Month and year of obtaining Engineering Diploma/Degree .
15. Medium opted for answering question paper (Hindi/English)
16. Details of application fee particulars
(16.1) Indian Postal Order/Bank Draft No. and Date :
(16.2) Amount Rs. ; .
(16.3) Issuing Bank/Post Office :
(16.4) Payable in favour of at ..
I do hereby declare that all the statements made in the application are true, complete and correct to the best of my knowledge and belief. I understand that in the event of any particular information given above being found false or incorrect, my candidature for the post of Telecom Technical Assistant Officer is liable to rejected or cancelled and in the event of any mis-statement or discrepancy in the particulars being detected after my appointment, my services are liable to be terminated forthwith without any notice to me.
Signature of the applicant.
Date:
Place:
Admit Card
( In duplicate)
|
Identical Photograph of the Applicant as on The application Form and attested by a Gazetted Officer |
Roll No .
(to be filled by the office)
Please allow Mr*/Mrs*/Ms*
Son/Daughter/Wife of Mr.** ...
whose photograph is affixed on the admit card to appear in the Examination for Recruitment of Telecom Technical Assistant-2008 of Bharat Sanchar Nigam Limited, NTR, New Delhi at examination centre (to be given by the office)
Time Table:
|
Part |
Subject |
Date & Day |
Time (IST) |
|
I II III |
General Ability Test Basic Engineering Specialization |
11.01.2009 (SUNDAY) |
10.00 AM to 1 PM |
* & ** (to be filled by the applicant)
Signature ..
Asstt.
General Manager (R&E)
O/o the C.G.M (M),NTR, New Delhi
SCHEME & SYLLABUS FOR TTA
DIRECT RECRUITMENT EXAMINATION
The standard of paper in General ability test will be such as may be expected of an Engineering Diploma holder. The standards of papers in other subjects will approximately be that of Diploma level of an Indian polytechnic. There shall be a single multiple choice objective type paper of 3 hours duration as per details given below:
Sl.No. Paper Marks Time allowed
1. Part I : General ability
test 20
2. Part II : Basic
Engineering 90 3 Hours
3. Part III : Specialization 90
Note 1. The candidate is required to obtain minimum qualifying marks in each of these parts as may be prescribed by the BSNL .
Detailed syllabus
Part- I: General ability test --- 20 marks
The candidates comprehension and understanding of General English shall be tested through simple exercise such as provision of antonyms and synonyms, fill in the blanks and multiple choice exercise etc. This shall also include question on current events, general knowledge and such matters of everyday observation and experience as may be expected of Diploma holder.
Part- II: Basic Engineering 90 Marks
Detailed syllabus is as under :-
1. Applied Mathematics: Co-ordinate Geometry; Vector Algebra; Matrix & Determinant; Differential Calculus; Integral Calculus; Differential equation of second order; Fourier series; Laplace Transform; Complex Number; Partial Differentiation.
2. Applied Physics: Measurement -- Units and Dimension; Waves Acoustics; Ultrasonic; Light; Laser and its Application; Atomic Structure and Energy Levels.
3. Basics Electricity: Electrostatics, Coulombs law; Electric field; Gausss theorem; concept of potential difference, concept of capacitance and capacitors, Ohms law, power and energy, Kirchoffs voltage, current laws and their applications in simple DC Circuits; Basic Magnetism; Electro Magnetism; Electromagnetic Induction; Concept of alternating voltage & current; Cells & Batteries, Voltage & Current Sources; Thevenins theorem, Nortons theorem and their applications.
4. Electronic Devices and circuits: Classification of materials into conductor, Semi conductor, insulator etc. electrical properties, magnetic materials, various types of relays, switches and connectors. Conventional representation of electric and electronic circuits elements. Active and passive components; semi conductor physics; Semiconductor Diode; Bipolar Transistor & their circuits; Transistor Biasing stabilization of operating point; Single stage transistor amplifier; field effect transistor, MOSFET circuits applications.
Page 1/3
Multistage Transistor Amplifier; Transistor Audio Power Amplifiers; Feedback in Amplifier; Sinusoidal Oscillators; Tuned voltage Amplifiers; Opto Electronics Devices and their applications; Operational Amplifier; Wave shaping and switching Circuits.
Block Diagram of I.C. Timer/(such as 555) and its working; Motivation Circuits; Time Base Circuits. Thyristors and UJT; Regulated Power Supply.
5. Digital Techniques : Applications and advantages of Digital Systems; Number System (binary & hexadecimal); Logic Gates; Logic Simplification; Codes & Parity; Arithmetic Circuits; Decoders, Display Devices and Associated Circuits; Multiplexers and De-Multiplexers; Latches and Flip- Flops; Counters; Shift Register; Memories; A/D and D/A converters.
Part -III: Specialization-90 Marks
Detailed syllabus is as under:
1. Electrical
Three phases vs single phase supply, Star Delta connections,
relation between phase & line voltage, power factor and their measurements;
Construction and principles of working of various types of electrical measuring
instruments. All types of motor and generator-AC & DC, transformers,
starters, rectifiers, inverters, battery charges, batteries, servo and stepper
motors, contactor control circuits, switchgear, relays, protection devices
& schemes, substation, protective relaying, circuits breaker generator
protection, transformer protection, feeder & lightening protection , feeder
& bus bar protection, lightening arrestor, earthing, voltage stabilizer
& regulators, power control devices & circuits, phase controlled
rectifiers, inverters, choppers, dual converters, cycloconverters, power
electronics application in control of drivers, refrigeration & air
conditioning.
2 Communication
Modulation and demodulation-principles and operation of various types of AM, FM and PM modulators/ demodulators; pulse modulation-TDM, PAM,PPM,PWM; Multiplexing, principles and applications of PCM.
Introduction of Basic block diagram of digital and data communication systems, Coding error detection and correction techniques; Digital Modulation Techniques-ASK,ICW,FSK,PSK; Characteristics/working of data transmission circuits; UART, USART; Modems; Protocols and their functions, brief idea of ISDN interfaces, Local areas Network; Carrier Telephony-Features of carrier telephone system.
Microwave Engineering: Microwave Devices; Wave-guides; Microwave Components; Microwave Antennas; Microwave Communication Systems-Block diagram & working principals of microwave communication link.
3 Network,
Filters and Transmission Lines:
Two port network, Attenuators; Filters; Transmission Lines and their applications;
Page 2/3
Characteristic impedance of line; concept of reflection and standing waves on a transmission line; Transmission line equation; Principles of impedance matching; Bandwidth consideration of a transmission line.
4 Instruments
& Measurements:
Specification of instruments- accuracy, precision, sensitivity, resolution range, Errors in measurement and loading effect; Principles of Voltage, current and resistance measurements: Transducers, measurement of displacement & strain; force & torque measuring devices, Pressure measuring devices, flow measuring devices, power control devices & circuits. Types of AC milli voltmeters- Amplifier rectifier and rectifier-amplifier; Block diagram explanation of a basic CRO and a triggered sweep oscilloscope, front panel controls: Impedance BridgeS & Q-Meters. Principles of working and specifications of logic probes, signature analyzer and logic analyzer signal generator, distortion factor meter, spectrum analyzer.
5 Control
System:
Basic elements of control systems, open & closed loop system, concept of feedback; Block diagram of control system; Time lag, hysterisis, linearity concepts; self regulating and non self-regulating control systems. Transfer function of simple control components, single feedback configuration; Time response of system.
Stability Analysis- Characteristics equation, Rouths table, Nyquist criterion, Relative stability, phase margin & gain margin.
Routh Hurwitz criterion, Root locus
techniques, Bode plot, Polar plot, Gain margin & Phase margin.
6
Microprocessors:
Typical organization of a microcomputer systems & functions of its various blocks: Architecture of a Microprocessor; Memories and I/O interfacing; Brief idea of M/C assembly languages; Machines & mnemonic codes; Instructions format and Addressing mode, concept of instruction set; programming exercises in assembly language; concept of interrupt; Data transfer techniques- sync data transfer, interrupt driven data transfer, DMA; Serial output data, Serial input data.
7
Computers:
Computer and its working, types of computers, familiarization with DOS and Windows- concept of file, directory, folder, Number systems; Data representation; Programming- Elements of a high level programming language, PASCAL, C; Use of basic data structures; Fundamentals of computer architecture, Processor design, control unit design; Memory organization. I/O system organization; Microprocessors micro processor architecture, instruction set and simple assembly level programming; Microprocessor based system design: typical examples: Personal computers and their typical uses, data communication principles, types and working principles of modems; Network principles, OSI model, functions of data link layer & network layer, networking components, Communication protocolsa- X.25, TCP/IP.
Database Management System- Basic concepts, entity relationship model, relational model, DBMS based on relational model.
Page3/3